Meril 3-in-1 Black Onyx 3-in-1 pushchair

To install a wheel, insert its metal pin into the appropriate opening on the frame and press until you hear a click. This applies to both the front and rear wheels. To remove a front wheel, press the button behind the wheel and slide it out. Remove a rear wheel by pressing the button beneath the wheel. To lock the front wheels for straight-line travel, position them straight and slide the locking buttons above the wheels upwards.

Grip the handle and lift the frame of the Meril 3-in-1 pushchair. You will hear a click when the frame has been unfolded correctly. Before use, check that the mechanism is locked.

The seat unit can be installed either forward-facing or rear-facing, depending on the selected position. Place it in the guides on the frame; a click confirms that it is securely attached. Before setting off, make sure the seat unit is firmly in place. To remove it, press the release buttons and lift the seat unit.

Slide the buckle components into the central buckle until you hear a click. The harness in the Meril 3-in-1 pushchair has five points and a magnetic buckle. To release it, press the button on the central buckle. Adjust the harness length using the sliders or by threading the straps through the appropriate openings in the seat cover.

To stop the Meril 3-in-1 pushchair, press the central foot-operated parking mechanism to lock the wheels. When you want to move again, lift the mechanism to unlock the wheels. Before leaving the pushchair stationary, check that the wheels are locked.

To lower the footrest, press the buttons on both sides and push it down to the desired position. A click confirms that it is correctly positioned. To raise it, lift the footrest until you hear a click. The Meril 3-in-1 pushchair has a 4-position footrest adjustment.

Press the handle adjustment buttons and set it to a comfortable position. The adjustment lets you adapt the handle position of the Meril 3-in-1 pushchair to the person pushing it. After changing the position, check that the handle is correctly set.

You can adjust the hood by moving it forwards or backwards, depending on your needs during the walk. When fully extended, fasten the zip. This lets you change its position without using any additional mechanisms.

Adjust the backrest using the lever at the back. Move it to the desired position; a click confirms that it is correctly set. The Meril 3-in-1 pushchair has 3 backrest adjustment levels.

To remove the bumper bar, press the release buttons and pull it out of its mount. To reattach it, slide the bumper bar back into place until you hear a click. The bumper bar on the Meril 3-in-1 pushchair can be released from both sides and rotated.

First, fold the seat unit hood, regardless of which way the seat is facing. Then press the seat-folding lever and lower the seat as far forwards as possible. Move the folding levers on both sides of the handle, then push the frame down until the pushchair is folded. Do not fold the Meril 3-in-1 pushchair with the carrycot attached. Remove the carrycot first, then fold the frame.

After unfolding the carrycot, secure its base by sliding the metal rods into the guides. Then fasten the fabric covers, place the mattress inside and fit the carrycot cover. Finally, fasten the cover zip.

Attach the carrycot facing the person pushing the pushchair to maintain eye contact with your child. First, place the mattress in the carrycot, then slide the carrycot adapters into the guides on the frame until you hear a click. The carrycot can also be attached directly to the frame without adapters. When using the adapters, slide the carrycot guides into the adapters on the frame until they click into place, adjust the hood using the buttons on both sides and check that the carrycot cannot be removed freely from the frame.

Press the buttons on the carrycot adapters, then lift the carrycot and remove it from the pushchair frame. The Meril 3-in-1 carrycot can be carried with your child inside. When removing it, hold the carrycot securely using the designated handles.

To install a wheel, insert its metal pin into the appropriate opening on the frame and press until you hear a click. This applies to both the front and rear wheels. To remove a front wheel, press the button behind the wheel and slide it out. Remove a rear wheel by pressing the button beneath the wheel. To lock the front wheels for straight-line travel, position them straight and slide the locking buttons above the wheels upwards.