Maddie Set Beige High chair

Assemble the Maddie Set high chair or bouncer on the unfolded frame, with the metal pin pointing upwards. Separate both sides of the frame and pull them in opposite directions. Slide the seat onto the pin, aligning the arrows on both parts until you hear a click. To disassemble it, hold button A, align the arrows and press button B.

Slide the tray onto the high chair armrests while pressing the lock at the front of the tray at the same time. To change its position, press the lock button. To remove the tray insert, press the three clips. To remove the entire tray, press the lock button and pull the tray towards you.

Fasten the safety harness whenever your child uses the Maddie Set high chair. Connect the fastening components and insert them into the buckle on both sides. A click confirms that they are connected correctly. The high chair is fitted with an adjustable 5-point harness.

Adjust the backrest on the Maddie Set high chair or bouncer using the lever at the back of the backrest. Pull the lever to lower it to the lying position. The backrest has 3 adjustment levels, so you can adapt it to how you are currently using the product.

Change the height of the Maddie Set high chair using the handles and buttons by the armrests. Hold the handles on the left and right sides of the armrests at the same time. Then press the buttons to set the desired height. Keep holding both handles while making the adjustment.

You can adjust the footrest on the Maddie Set high chair by pressing the buttons on both sides. Once pressed, move the footrest up or down to the desired position. A click confirms that it is correctly positioned. This lets you adjust its position to suit your child’s current position.

The Maddie Set high chair or bouncer can rotate through 360 degrees. To change its direction, press the locking button and rotate the seat by 90 degrees. Further rotations let you set it to the required position. Before using it again, make sure that the seat is positioned correctly.

Lock the wheels on the Maddie Set high chair by pressing the parking brake. Once pressed, the high chair stays in place. To unlock the wheels, lift the brake. The product includes 4 wheels.

The Maddie Set high chair or bouncer folds after the tray has been removed and the cushion has been detached from the sides of the seat. Hold the backrest adjustment lever and move the lock on the side of the seat to fold the high chair forwards. Then hold the armrest. Press the locking button on the frame, and the seat will fold forwards.

Assemble the Maddie Set cot by securing the base and placing the mattress inside. Once the cot has been unfolded, slide the metal rods into the guides, then slide them onto the pin in the frame, aligning the arrows correctly. Turn the cot until it clicks and make sure it is assembled correctly before use. To remove it, turn it to a 45-degree angle, align the arrows, move the lock and lift it.

Clean the Maddie Set high chair according to the type of component to keep it clean. Wipe the frame with a cloth, water and a mild cleaning agent, and wipe the outside of the cot with a damp cloth. Hand-wash the insert at a maximum of 30°C; do not tumble-dry or iron it. The top layer of the removable two-layer tray can be washed in the dishwasher, while the inside of the cot and the mattress cover can be machine-washed at a maximum of 30°C.

Assemble the Maddie Set high chair or bouncer on the unfolded frame, with the metal pin pointing upwards. Separate both sides of the frame and pull them in opposite directions. Slide the seat onto the pin, aligning the arrows on both parts until you hear a click. To disassemble it, hold button A, align the arrows and press button B.