Kori Blue Navy Tricycle

Start by fitting the rear wheels to the frame and check that they are secure by trying to pull them out. Press the clip on the front wheel axle, fit the wheel according to the marking on the mudguard, then insert the handlebar until you hear a click. Secure the rear basket with the nut, place the seat on the frame, insert the metal axle and tighten the screw on the other side. Insert the safety bar attachments until they click, connect its ends through the safety catch and check that the harness is properly secured. Finally, fit the canopy, parent handle with lock, footrests, front basket and cup holder.

The child should sit on the seat, fasten the harness, hold both handlebar grips and pedal to start moving. The direction is changed by turning the handlebar, while braking is done by stopping pedalling.

The freewheel function allows the child to pedal independently of the vehicle's speed. Activate it using the lever on the side of the wheel. Moving the lever again makes the pedal movement drive the wheel. When the child is riding independently, the freewheel function should be deactivated.

To use Kori as an independent tricycle, remove the parent handle. Tilt the lever at the bottom of the handle and slide the handle out, then fit the protective cap over the metal axle protruding from the frame.

Adjust the backrest using the buckle at the back of the seat, choosing one of three positions. A click confirms that it is locked correctly. The positions are available with the seat facing forwards or backwards, and the backrest can be folded forwards for transport.

Change the seat position by loosening the screw underneath it. Set the seat to the desired forward- or rear-facing position, then tighten the screw firmly again.

Adjust the handle height by pressing the lock on its top. The handle has 3 height settings, so you can choose one of the three available levels.

Lock the rear wheels by pressing both foot-operated brakes with your foot. The Kori tricycle has two brakes, so both should be engaged at the same time when parking.

First, unscrew the seat from underneath the frame and remove it, then detach the safety bar using the buttons on the sides of the seat. Remove the handlebar by pressing the button and pulling it upwards, then remove the front wheel by pressing the clip on its axle. Detach the rear wheels by releasing the locking buttons on each one. Release the lock underneath the parent handle and pull it out, then remove the footrests, cup holder and baskets. For transport, fold the backrest, fasten the safety bar at the top and detach the parent handle.

Clean the tricycle with a soft cloth. Do not immerse it in water or pour water over it. Fabric elements can be machine washed at temperatures up to 30°C. Regularly check the condition of the parts and their attachments. Connecting elements, such as the frame and handlebar hinges, can be lubricated with oil.

Start by fitting the rear wheels to the frame and check that they are secure by trying to pull them out. Press the clip on the front wheel axle, fit the wheel according to the marking on the mudguard, then insert the handlebar until you hear a click. Secure the rear basket with the nut, place the seat on the frame, insert the metal axle and tighten the screw on the other side. Insert the safety bar attachments until they click, connect its ends through the safety catch and check that the harness is properly secured. Finally, fit the canopy, parent handle with lock, footrests, front basket and cup holder.