Thermup Duo White Bottle warmer and steriliser

Place a bottle of milk or water in the warmer, add the appropriate amount of water and select the milk-warming function. The default setting is 40°C, and the temperature can be adjusted between 37–55°C. Once the temperature is reached, select the bottle capacity and the appliance will start a countdown based on the amount and initial temperature of the milk. After warming, check the temperature before feeding, serve the milk immediately and do not warm it again.

With the THERMUP DUO warmer, you can select a milk quantity of 60 ml, 120 ml, 180 ml or 240 ml. Selecting the correct capacity helps adjust the warming cycle to the amount of milk in the bottle.

Use 30 ml, 60 ml, 90 ml or 120 ml of water in the THERMUP DUO warmer. Adjust the amount to the quantity of milk to start the correct warming cycle.

Place the food container in the warmer and add water up to the level of the food in the container, using 200–500 ml. Select the food-warming function, which operates at 70°C by default and can be adjusted between 56–85°C. Once the set temperature is reached, a 40-minute countdown begins, after which the appliance switches to standby mode. Stir the food frequently while it is warming and check its temperature, as the warming time depends on the consistency of the meal.

First wash and thoroughly rinse the bottle and accessories, then place them upside down in the warmer. Add water so that its level does not exceed the bottle base. Select the disinfection function. The appliance operates at 100°C, which cannot be adjusted. Once this temperature is reached, a 15-minute countdown begins, after which the warmer switches to standby mode.

Place a bottle or food container in the warmer, add the appropriate amount of water and select the defrosting function. The default temperature is 38°C, with an adjustable range of 37–44°C. Once the selected temperature is reached, a countdown begins. When it ends, the appliance maintains a constant temperature for 72 hours and then switches to standby mode.

The recommended amount of water in the THERMUP DUO warmer depends on the amount of milk. Before starting the appliance, select the water level appropriate for the portion of milk being prepared.

Error E1 indicates a short circuit in the temperature sensor of the THERMUP DUO warmer. If this occurs, contact the service department for assistance with the appliance.

After each use, unplug the appliance and wait for it to cool down. Empty the water, and after warming food, check that no residue remains on the bottom. Wipe the housing and interior with a soft, damp cloth, then dry them with a clean cloth or paper towel. Do not use scouring sponges, abrasive cleaners or corrosive chemicals.

Descale the THERMUP DUO bottle warmer regularly, every four weeks, to help maintain its proper operation. Pour 50 ml of white vinegar and 100 ml of cold water into the device, switch it on and select the milk-warming function for 10 minutes. Leave the solution in the device until all limescale has dissolved. Then unplug the device, pour out the solution and rinse the inside with water.

Place a bottle of milk or water in the warmer, add the appropriate amount of water and select the milk-warming function. The default setting is 40°C, and the temperature can be adjusted between 37–55°C. Once the temperature is reached, select the bottle capacity and the appliance will start a countdown based on the amount and initial temperature of the milk. After warming, check the temperature before feeding, serve the milk immediately and do not warm it again.