Moxie i-Size Set Black Carbon Car seat

First, loosen the harness straps, then pull the lever upwards. Move the headrest up or down to the height suitable for your child. The headrest adjustment range is 7 cm, and the harness height adjustment is integrated with it.

A child up to 75 cm tall should use the reducer insert. The insert has a removable lumbar section, which can be removed as your child grows. Once your child exceeds 75 cm in height, remove the entire reducer insert.

Press the adjustment buttons on both sides of the car seat and set the handle to the desired position. You can choose positions for use in the car, carrying, storage and placing the car seat on a flat surface. Release both buttons at the same time to change the handle position.

Adjust the canopy by pulling its front section to the desired position. To remove the canopy cover, detach the fasteners, slide off the fabric and remove the stiffening rod. When putting it back on, remove the plastic part of the canopy, fit the fabric, attach it alternately to the fasteners, then reattach the canopy to the car seat.

The harness straps should fit snugly against your child's body, without twists or discomfort. Place the car seat on a level surface, loosen the harness by pressing the tension adjustment button, and release the buckle using the red button. Place your child in the seat, connect the harness tongues and insert them into the buckle until you hear a click. Adjust the headrest so that the shoulder straps come out of the backrest at shoulder height or slightly above, then tighten the harness using the adjustment strap. The harness is correctly tightened when two fingers fit between the shoulder strap and your child's chest.

First, loosen the harness by pressing the tension adjustment button and pulling the straps. Then press the red button on the buckle. Remove the harness tongues from the buckle and release them before taking your child out of the car seat.

To remove the car seat from the car, release the vehicle seat belts. Then remove them from the belt guides. Once the belts have been released, you can carefully remove the car seat from the car.

Attaching the car seat to the pushchair frame first requires inserting the adapters in the correct positions, as described in the pushchair instructions. Insert the adapters until you hear a click. Then place the car seat onto the adapters and make sure it is correctly locked in place, which is also confirmed by a click. To release the car seat from the frame, press the pushchair adapter release buttons.

Start by removing the canopy cover and releasing the car seat harness. Remove the reducer insert, protective cushions and buckle pad. Tilt the lower part of the headrest, slide off its cover and feed the adjustment lever through the corresponding opening. Then pass the buckle through the opening in the cover and remove the fabric by feeding the rigid parts through the appropriate openings. To refit the cover, follow these steps in reverse order.

Clean the plastic parts with a damp cloth and mild detergent. This helps you remove everyday dirt without using harsh products. Do not use strong detergents or bleach.

You can remove minor dirt with a damp sponge and gentle cleaning product. Once fully removed from the car seat, the cover can be machine washed at a maximum temperature of 30°C. Do not tumble dry it or dry it in direct sunlight.

First, loosen the harness straps, then pull the lever upwards. Move the headrest up or down to the height suitable for your child. The headrest adjustment range is 7 cm, and the harness height adjustment is integrated with it.