Levi i-Size Blue Cobalt Car seat

To install the backrest, attach the elastic cover straps to its hooks and place the plastic hooks into the appropriate openings in the base. Then raise the backrest to an upright position. To remove it, push the seat backrest all the way into a horizontal position. Unfasten the backrest hooks and separate it from the base. To reinstall the backrest, repeat the installation steps described above.

You can adjust the headrest height after fully loosening and unfastening the car seat safety harness. Pull the adjustment strap and position the headrest so that it surrounds your child’s head without sitting below or above it. Also check that the car seat shoulder straps are at the same level as your child’s shoulders.

To remove the Levi i-Size car seat, unfasten the vehicle safety belt and slide it out of the belt guides. Then carefully remove the car seat from the vehicle. This model is installed using the vehicle safety belt.

The car seat safety harness can be stored when the child’s height is between 100 and 150 cm. Unfasten it using the central red button, remove the reducer insert and take off the buckle cover. Unfasten the metal fasteners on the upper backrest cushion, lift the headrest with the cushion, then unfasten the fasteners on the lower cushion and move it to the right. Place the harness components under the lower backrest cushion, pass the buckle through the opening in the cover and store it beneath the cover. Finally, adjust the tension of the stored harness using the strap.

To remove the car seat safety harness, take out the reducer insert and remove the buckle cover. Unfasten the metal fasteners on the upper backrest cushion, then lift the headrest and cushion. Unfasten the fasteners on the lower backrest cushion and move it to the right. Remove the harness from the metal buckle at the back of the car seat. Finally, thread the harness covers through the loop and remove them through the openings in the backrest.

The cover can be removed in stages, making it easier to prepare for washing. First, unfasten the metal fasteners at the back of the headrest cover and remove the cover by pulling it upwards. Then remove the backrest cover and the seat base cover by pulling them upwards. To put the cover back on, follow these steps in reverse order.

Clean small stains with a damp sponge and a mild cleaning product. The removable cover can be washed at temperatures of up to 30°C after being completely removed from the car seat. Wipe the plastic components with a damp cloth and mild detergent. Do not use strong detergents or bleach, and do not tumble-dry or dry the cover in direct sunlight.

To install the backrest, attach the elastic cover straps to its hooks and place the plastic hooks into the appropriate openings in the base. Then raise the backrest to an upright position. To remove it, push the seat backrest all the way into a horizontal position. Unfasten the backrest hooks and separate it from the base. To reinstall the backrest, repeat the installation steps described above.