Levi Fix i-Size Pink Baby Car seat

The Levi Fix i-Size car seat is installed forward-facing with the car seat harnesses stowed away. Place it on the vehicle seat. For installation with ISOFIX, extend the arms using the lever, attach them to the vehicle seat anchors and check the green indicators on both sides. Press the car seat against the backrest by moving the base from side to side. When installing without ISOFIX, skip these steps. Then secure your child with the vehicle’s 3-point seat belt, guiding its sections through the indicated guides and pulling the belt towards the retractor.

Before adjusting, loosen the car seat safety harness as much as possible and unfasten it. Pull the headrest adjustment strap and set the desired height. The shoulder harness height changes automatically together with the headrest. The harness should be positioned at the child's shoulder height, not at ear level, above the ears or behind the child's back.

The reducer insert should be used while the child is up to 87 cm tall. Once the child exceeds 87 cm in height, the insert must be removed from the car seat.

The car seat harness can be stored when the child is in the 100–150 cm height range. Unfasten it using the red buckle button, then remove the buckle cover and reducer insert. Raise the headrest and backrest cushion, undo the metal fasteners on the lower cushion and move it to the right. Place all the harness components under the lower backrest cushion. Pass the buckle through the appropriate opening in the seat cover, tuck it under the cover and adjust the harness tension using the adjustment strap.

To detach the car seat installed using the ISOFIX system, press the ISOFIX levers. Extend the arms from the base until the indicator on the ISOFIX button turns red. Then pull the ISOFIX lever. Retract the arms into the car seat base on both sides.

When removing the car seat, first loosen the Top Tether strap. Then detach it from the anchorage points in the car. Once detached, the indicator will turn red.

To remove the car seat harness, take out the reducer insert and remove the buckle cover. Raise the headrest and backrest cushion. Undo the metal fasteners on the lower backrest cushion and move the cushion to the right. Remove the harness from the metal connector at the back of the car seat. Pass the harness covers through the loop, then pull them out through the appropriate openings in the backrest.

You can remove the cover from the Levi Fix i-Size car seat after undoing the metal fasteners. First, undo the fasteners at the back of the headrest cover. Remove the headrest cover. Then undo the metal fasteners at the back of the seat cover and remove the cover from the seat and backrest.

Clean small stains with a damp sponge and a mild cleaning agent. Once completely removed from the car seat, the cover can be hand-washed at temperatures up to 30°C. Do not use a tumble dryer or dry the cover in direct sunlight. Clean the plastic components with a damp cloth and mild detergent. Avoid strong detergents and bleaching agents.

The Levi Fix i-Size car seat is installed forward-facing with the car seat harnesses stowed away. Place it on the vehicle seat. For installation with ISOFIX, extend the arms using the lever, attach them to the vehicle seat anchors and check the green indicators on both sides. Press the car seat against the backrest by moving the base from side to side. When installing without ISOFIX, skip these steps. Then secure your child with the vehicle’s 3-point seat belt, guiding its sections through the indicated guides and pulling the belt towards the retractor.