Sven Plus Yellow Scandi Travel cot

To correctly unfold the Sven Plus travel cot, place it on the floor after undoing the hook-and-loop straps, then pull the legs apart in opposite directions. Keep the central lock raised, then lock the upper rails, starting with the longer rails and then the shorter ones. The rails can only lock when the floor lock is fully raised. Press the floor lock down until it is completely flat and clicks into place. Then place the mattress inside and fasten it with the hook-and-loop fasteners along the two shorter sides.

Install the raised platform by first attaching it to the Sven Plus travel cot with the zip. Once it is fastened, secure it with the buckle, slide the zip cover over the zip and fasten the hook-and-loop tab. Insert the stiffening tubes into the sewn-in holders, connect them in pairs and then place the mattress on top. Fasten the mattress underneath the raised platform, which is reinforced with the tubes, using the hook-and-loop fasteners.

You can install the canopy by placing its rear section over the Sven Plus travel cot, stretching the fabric and securing it with the plastic clamp fasteners. After installation, press down on the canopy from above several times to remove its pointed shape. The mosquito net can only be used when the canopy is open. The mosquito net must be detached before folding the canopy.

To assemble the changing table, first slide the support tubes into the fabric sleeves and connect them together. Fasten the fabric with the hook-and-loop fasteners at the shorter ends. Then attach the changing table to the shorter and longer frames of the Sven Plus travel cot using the mounting components, and fasten the hook-and-loop fasteners around the frame. When the changing table is not needed, you can leave it hanging at the side of the cot.

Attach the organiser by hanging it from the frame of the Sven Plus travel cot using the hooks. This keeps it by the cot, so you can keep the essentials in one place during daily care.

To fold the Sven Plus travel cot, remove the accessories, mattress, canopy and organiser, then pull the central handle in the floor upwards. The raised section does not need to be removed. Unlock the rails by pressing the buttons on both sides, lifting the rails slightly and pushing them down, first on the shorter sides and then on the longer sides. Keeping the handle raised, lift the floor and fold the legs. Wrap the folded cot in the mattress, fasten the hook-and-loop straps and place it in the bag.

Clean the Sven Plus travel cot with a damp cloth and leave it to dry after wiping it. Wash the changing table with warm water and mild soap. Do not dry-clean the components or clean them with corrosive products, do not tumble-dry them and do not iron them.

To correctly unfold the Sven Plus travel cot, place it on the floor after undoing the hook-and-loop straps, then pull the legs apart in opposite directions. Keep the central lock raised, then lock the upper rails, starting with the longer rails and then the shorter ones. The rails can only lock when the floor lock is fully raised. Press the floor lock down until it is completely flat and clicks into place. Then place the mattress inside and fasten it with the hook-and-loop fasteners along the two shorter sides.