Tris Plus Beige Sand Tricycle

Assemble the Tris Plus tricycle in sequence, checking each connection before continuing. Unfold the frame, attach the rear wheels until you hear a click, and check that they cannot be pulled out. Then fit the front wheel with the mudguard according to the markings, followed by the handlebar. Screw the seat into place, connect the mudguard to the rear frame with the metal connector, and then attach the footrest. Insert the bumper bar on both sides of the seat and connect its sections until they click into place. Next, attach the canopy to the backrest and fit the parent handle, closing the locking lever. Finally, secure the bag with the hook-and-loop fastener in the centre of the handle and attach the pedals on both sides of the front wheel. Disassemble the tricycle in reverse order.

Adjust the parent handle height by pressing the button and selecting a comfortable position. Once adjusted, and before you start riding, check that the handle remains at the selected height.

Adjust the backrest using the buckle at the back of the seat, choosing one of the available positions. A click confirms that the backrest is correctly locked. It can also be folded forwards for transport.

Rotate the seat 360° using the button underneath it. Stop the tricycle before changing the seat position. Then set the seat to face the direction you want.

Set the freewheel function by pressing the button by the front wheel and partially extending the pedal pin. In this setting, your child can pedal without affecting the tricycle's movement. To make the pedals drive the wheel again, press the button and push the pedals in.

Lock the rear wheels by pressing both independent brakes with your foot. Before leaving the tricycle unattended, make sure that both brakes have been engaged.

For older children, fold or unfold the footrest by moving the black frame downwards and setting it in the desired position. The pedals can be folded vertically by pushing them towards the frame.

Clean the Tris Plus tricycle with a soft cloth. Do not pour water over it or immerse it in water. Fabric elements can be hand-washed at temperatures of up to 30°C. Regularly check that all components are tightened and undamaged, and do not use the tricycle if any parts are defective. Connecting elements, such as the frame and handlebar hinges, can be lubricated periodically.

Assemble the Tris Plus tricycle in sequence, checking each connection before continuing. Unfold the frame, attach the rear wheels until you hear a click, and check that they cannot be pulled out. Then fit the front wheel with the mudguard according to the markings, followed by the handlebar. Screw the seat into place, connect the mudguard to the rear frame with the metal connector, and then attach the footrest. Insert the bumper bar on both sides of the seat and connect its sections until they click into place. Next, attach the canopy to the backrest and fit the parent handle, closing the locking lever. Finally, secure the bag with the hook-and-loop fastener in the centre of the handle and attach the pedals on both sides of the front wheel. Disassemble the tricycle in reverse order.